Black Cat Launch Video

In November 1997 we launched our Didi 38 "Black Cat" after 2 years of building, only 2000 hours for an amateur-built ocean-crossing sailboat. That boat launched a whole series of designs and new developments in plywood boat construction.

That was 20 years ago. I had video of the occasion that was recorded off the TV with a VCR. It was bad quality and it was recorded on the PAL system used in South Africa. Attempts to convert to the NTSC format used in USA were pretty disastrous, resulting in unusable files.

Today I have received a good copy of the video, in a usable format. Watching the video now reminds me just how long ago this all happened. I didnt even have much grey hair then, now it is totally silver.

This video shows the shape of "Black Cat" very clearly. So many people came to me at that time and would not believe that this beautifully rounded shape was a plywood boat. Nobody had seen a rounded plywood hull before and they would only believe that it was not fibreglass after going inside to look at the structure.

Now my radius chine plywood designs are well-known and have been built in many countries. "Black Cat" is no longer unique but she remains the leader of an exciting time for plywood boatbuilding.

To see more of our boat designs, visit http://dixdesign.com/ or http://dixdesign.com/mobile

Read More..

Cape Cutter 19 Launch in Cape Town

Nick Kulenkampff, of Cape Town, bought plans from us in November 2013 for the Cape Cutter 19, to be built in lapstrake plywood. I only received one question from him and that was on choice of plywood for the build. A few days ago I received another email from him, with launch photos attached. He launched his boat, named "Mimi", at Royal Cape Yacht Club, in February.

In his email, Nick said "thank you for a beautiful design and also for a set of plans that were spot on. I thoroughly enjoyed the entire process." From the photos it appears that he made a pretty good job of the build, which was also quicker than most at about 15 months.

This boat is available in GRP from Cape Cutter Yachts in UK. It is the smaller sister to our popular Cape Henry 21 design.

Here are some of Nicks build photos, with explanations

Making bulkheads. These are cut from full-size Mylar patterns, included in the plans.

Transom, laminated from multiple layers of plywood.

Bulkheads and transom set up on building stocks.

Bottom skin going on. Plenty of clamps needed.

Bilge panel gong on. Keel deadwood and wood bilge keels fitted. This bilge keel is to protect the hull when aground, serving purely as a support to keep the hull skin clear of pebbles.

Forward bottom panel. Fitting this panel is the most difficult part of the build, due to the amount of twist in the panel. The twist is what forms the fine bow for good performance.

Hull epoxy-coated, primed and ready for paint.

Building the cockpit. Nicks work is very neat.

Interior, looking forward, built  before fitting the deck.

Interior, looking aft. Painting in progress.

Deck stringers glued into pre-cut slots

Painted and brightwork being done. Almost ready to get wet.

This view shows why these little boats are so quick. That fine bow works vvery well.

Launch day. The yellow boat below the bow is "Black Cat", the Didi 38 that I built.

Afloat and waiting for her rig to be set up.

Thank you, Nick, for the set of photos. She looks good and I am sure you will have many good times sailing her.

To see more of this and out other designs, visit http://dixdesign.com/.

Read More..

Didi Sport 15 DS15 Launch

The long-awaited day arrived this weekend. Jim Foot, in Port Elizabeth, South Africa, launched his self-built DS15 at Algoa Bay Yacht Club. He started with a pre-cut plywood kit supplied by CKD Boats in Cape Town and took approximately 6 months of his spare time from start to launch.

DS15 "Bateleur" about to get wet for the first time.

 Despite the very light wind, they had good sailing and were impressed by performance. Jims first comments are:-

She sails beautifully and she is fast. Beating into a chop in light wind this am going at about 3,7 kts felt happy. Then was told wind spd 4 kts by passing boat quite amazing.

Very well behaved. No balance issues. Save a bit of lee helm with the kite up. Loads of compliments from older sailors. Hunter Gall get on the water you dont know what you are missing. This is one good boat. Ps only sailed in bulb config at this stage.
A few changes to make. But not many. Congrats Dudley on a fantastic hull. Its a beaut.

Ready for sails and rarin to go.

Rigging the sails. Clean deck layout and large cockpit.

Jims friend Mark Dawson was with him for the first sail and passed these comments:-

Lucky enough to be the first to sail this boat with James Norman Foot. What a beaut! After a hairy moment of rocking the boat to moorings, which became a desperate paddle when we started drifting towards the rocks, we rigged the sails and immediately accelerated away. Bateleur likes to sit flat and notably accelerate in the lightest of wind puffs. A forced capsized showed how stable she is and how literally effortless to bring her back. Sailing the Didi 15, I just want to go again. Cant wait to see her in stronger breeze. In summary...I need one.

"Bateleur" returning to ABYC with a very happy crew.

Jim will keep us up to date with his testing and fine-tuning over the next few weeks. I hope that we will also get to see some photos and videos in stronger winds as Jim and "Bateleur" grow to know each other.

The top photo of this post shows the hull shape very nicely. For those who have not followed my posts about the build, this is a plywood boat although it doesnt look like one. It is the smallest in our radius chine plywood Didi design range. The hull is the same family as the Didi Mini Mk3 and Didi 950, with topside chine above a radius chine underbody.

It can be built from plans only, plans and patterns or plans and a CNC kit. See more info about all of our designs on our website at http://dixdesign.com/

Read More..