Kamis, 07 April 2016

Drake 19 hull 1 built on Cape Cod

I took a pleasant 3 1/2 hr trip down to Wellfleet, MA, way out on the arm of Cape Cod, to meet Walter Baron of Old Wharf Dory Co. and see the first ever Drake 19 "in the flesh".

Walt of Old Wharf, boatbuilder on Cape Cod


The boat looked great to me. I was so pleased. Even as the designer, I was struck by how much boat there is; it is 192" LOA afterall. Designed to be an open water, cruising rowboat for one, the boat would also make an excellent tandem rowboat for rows in the harbor or in more open water.
Drake 19 rightside up.
The interior has two side tanks on either side of the sliding seat system. The tanks will help the boat be self rescuable, with some additional flotation in the ends, The rails slide right into precut holes in the frames of the boat. Everything fits just so.
Sliding seat system integrates into the CNC cut structure of the boat
After this build, and with a few months to finish out the drafting and writing of the manual, the boat will be available as a kit.



Related Posts by Categories

0 komentar: